Cutters POWERCUT - MAXICUT
- PROFICUT
Small but pratical, these cutting machines are very simple to
use. It's sufficient to locate on the bench the material to work
and then push the motor with the diamond disk.
This allows an exact cut and a careful treatment of the workpiece.
Common characteristics for the 3 models:
- Perfect cooling of the diamond disk running in water
- Easily transportable due to the low device weight
- Compact design, low space requirement
- Mitre and double mitre cuts are possible
- Accurate aluminium steps
- Precision aluminium bench
- Sheet steel machine frame, powdre-coated
- Specific splash guard
- High-performance motors with motor brake and therminal sensor
- Big water tray
|
POWERCUT:
Motor mechanism, with 4 ball bearings.
| Types/Motor output powers: |
Article No.
|
P1Watt
|
Volt
|
Duty cycle
|
min-1
|
0PWC101
|
400
|
230
|
25%
|
2800
|
|
 |
Technical data:
Diamond disk: 180 mm
Borehole: 22,2 mm.
Cutting length: 360 mm.
Weight: about. 15 Kg.
Bench size: 375x575
mm.
Cutting depth: 27 mm.
Inclination: 90-45° |
MAXICUT:
Motor guide mechanism, with 4 ball bearings
.
| Types/Motor output powers |
Article No.
|
P1Watt
|
Volt
|
Duty cycle
|
min-1
|
0MXC101
|
800
|
230
|
25%
|
2800
|
|
Technical data:
Diamond disk: 230 mm
Borehole: 22,2 mm.
Cutting length: 450 mm.
Weight: about 25 Kg.
Bench size: 380x725
mm.
Cutting depth: 60 mm.
Inclination: 90-45° |
|
PROFICUT:
Motor guide mechanism, with 6 ball bearings.
| Types/Motor output power |
Article No.
|
P1Watt
|
Volt
|
Duty cycle
|
min-1
|
0PFC101
|
1,8
|
230
|
25%
|
2800
|
|
 |
Technical data:
Diamond disk: 300 mm
Borehole: 30 mm.
Cutting length: 700 mm.
Weight: about 40 Kg.
Bench size: 380x1000
mm.
Cutting depth: 75 mm.
Inclination: 90-45° |
|
 |
